To find a replacement you'll need to remove the door lock from the door and measure the cutout hole. The portion of the handle that's inside your trailer should have some screws you can remove to take the lock apart and gain access to the cutout hole.
For example, the Bauer Products European Style Motorhome Entry Lock # BA58AR requires 7-7/16" tall x 3-3/4" wide cutout hole. Once we know your measurements we can start looking for a replacement. view full answer...
I do have some options for replacing your Atwood GE 16. You certainly can use the Dometic # DMC74FR to replace it since it is a similar gas/electric tanked water heater. The main difference is that they Dometic unit is smaller than your Atwood unit. The Dometic # DMC74FR is 12-3/4" tall x 12-3/4" wide x 19-7/8" deep, so you will likely have to do a bit of modification to your cutout to allow it to fit correctly. Pretty much any new unit is going to be smaller than your Atwood unit. view full answer...
I do not ahve the abilty to pull an OEM build sheet for part numbers however, we have a couple options available. The Single Slide-Out Switch, # 37212285 is a 12V 40-amp continuous/momentary switch assembly. With cutout dimensions of 1.85" tall x 1.20" wide.
If you have a Lippert Components Slide-Out then I recommend the Lippert Hydraulic Interior Switch, # LC120639. view full answer...
We do have a sliding door guide available from JR Products, the Replacement RV Pocket Style or Sliding Door Guide # 37220595. This guide has an adjustable feature that allows it to fit any door thickness, and includes mounting screws.
I have attached a review video for your reference. view full answer...
The correct replacement slide out motor for your Power Gear Slide-Out is the:
-Replacement Gear Motor Assembly for Lippert Power Gear Slide Outs # LC386480. view full answer...
Go To Results